Testing Your Installation - HP 9000 300 Series Owner's Manual

Get user manuals: See SafeManuals.com

Testing Your Installation

A simple test to make certain that the drive has been installed correctly
(whether it is mounted or not) is to execute the command
appropriate character device le name as the argument). For example, enter
the following at the shell prompt:
diskinfo /dev/rdsk/6s0
If the disk is installed correctly,
about it, such as the following:
SCSI describe of /dev/rdsk/6s0
vendor: Quantum
product id: PD210S
type: direct access
size: 200000 Kbytes
bytes per sector: 512
After mounting a new disk on a directory, enter
directory listing. This should give you at least one le or directory entry. For
example:
total 1024
drwxr-xr-x 2 root
will display a listing of information
diskinfo
at the shell prompt to get a
ll
root 8192 Aug 31 15:24 lost+found
Configuring HP-UX for Printers and Drives 6-11
(using the
diskinfo
6