HP 9000 300 Series Owner's Manual page 87

Get user manuals: See SafeManuals.com
SAM does not support the following:
Note
Changing the hardware address of a disk drive containing
the root le system.
Changing the hardware address of a disk array.
Changing the hardware address of a disk that is part of
software disk striping.
After hardware installation has been completed (see the
this device), you'll need to ensure that your operating system is prepared to
exchange data with the device. This section provides instructions for doing
this.
1. Run SAM by typing the following:
/usr/bin/sam
Pressing the key gives you context-sensitive information for the object
4 f1 5
at the location of the cursor.
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
2. Choose
Disks and File Systems
3. Choose
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
CD-ROM, Floppy, and Hard Disks
4. From the
NNNNNNNNNNNNNNNNNNNNNNN menu, select the item
Actions
5. From the screen which appears, select the step
6. You will see a list of unused drives. Choose the disk you want to add from
this list.
7. If the device you have just connected doesn't appear, activate
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
, and you will be given the following options:
Device Missing
Installation Guide for
.
.
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Add a Hard Disk Drive
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Select a Disk to Add
Configuring HP-UX for Printers and Drives 6-9
6
.
.