HP 9000 300 Series Owner's Manual page 74

To Restore Individual Files:
1. Ensure that you have
2. Run SAM by typing:
/usr/bin/sam
3. Choose
4. Choose
5. Highlight the device in the list from which the data is to be restored.
6. Choose
highlight
7. Choose the
5
Do either of the following:
Fill in the lename containing a list of les to restore. The lenames
should be full pathnames. This le is
to create a graph le. You can use the on-line index le created by
a previous backup, but it must be edited to containing only the full
pathnames of the les to be restored.
Or enter each le name in the \Included" and \Excluded" boxes and
choose
use
is required, if you choose this method.
You can use both the le and the included/excluded method
simultaneously to specify les to be restored.
When you have completed determining the selected les to be recovered,
activate
5-8 Backing Up, Restoring, and Updating Your Software
Get user manuals: See SafeManuals.com
capabilities.
root
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Backup and Recovery
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN .
Backup Devices
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Recover Files or Directories
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Select Recovery Scope
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
checkbox (it should have an asterisk (*) in it.
Selected Files
NNNNNNNNNNN . If you make a mistake, highlight the entry with the error and
Add
NNNNNNNNNNNNNNNNNNNN or NNNNNNNNNNNNNNNNNNNN to correct the mistake. Only the \Included" box
Modify Remove
NNNNNNNN
.
OK
from the NNNNNNNNNNNNNNNNNNNNNNN
Actions
NNNNNNNN
. Activate or press
OK
4 Return 5
not a graph le. This le is used
menu and
.