HP 9000 300 Series Owner's Manual page 91

Get user manuals: See SafeManuals.com
5. From the
NNNNNNNNNNNNNNNNNNNNNNN menu, select
Actions
see a list of unused disks, including the new one you have connected.
6. Choose the line identifying the model of the new disk.
If the device you have connected does not appear on the list:
a. Check your hardware connections, and make sure that the device is
on .
turned
b. Activate the button
following options:
i. Have SAM rescan the system for the device. If you have connected
after starting SAM, you should activate
the device
activate NNNNNNNN .
No
ii. Respond to the con rmation screen regarding whether the device is
connected and powered up.
iii. Respond to the con rmation screen regarding whether additional
device drivers are needed.
iv. You will be given an information screen suggesting things to try if
the device still cannot be found.
7. After you highlight the device, note that the
on (the default). Activate this button to turn it o if you do not
toggled
wish to initialize a disk (or if the disk is preformatted).
8. Activate
NNNNNNNN when you have nished with this form.
OK
9. A \Messages" Box appears, reporting the progress of the task. When the
task is nished, activate
10. Exit SAM. (SAM copies your original
/etc/checklist.old
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Add a Floppy Disk Drive...
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN , and you will be given the
Device Missing
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Initialize disk
NNNNNNNN
.
OK
/etc/checklist
).
Configuring HP-UX for Printers and Drives 6-13
. You will
NNNNNNNNNNN
. Otherwise,
Yes
button is
to
6