HON Coze Desk Instructions

Coze Desk Instructions
™
Congratulations on your new HON Desk! From big ideas to the everyday tasks, we
know great things will come from your new workspace.
Included in this Box:
(x1) Screwdriver (x16) Screws (without storage)
Now that you have your Tools and Materials - Let's Get Started!
We have to tell you that it's important for you to read all the way through the instructions and carefully review all illustrations prior to installing
your new piece of furniture. By not reading these instructions, this may result in property damage or serious bodily harm. Once assembled, do
not move the desk with office equipment on, or in place. This may lead to damage or injuries as well.
Pro-Tips from our Team of Experts:
• Build the desk in the room/space you are going to use it to avoid moving through doors once assembled.
• It's helpful to know that not all of the pre-drilled holes will be used. So don't worry when you are putting your new desk together about that.
Steps to Assemble:
1
Place desk top with the finished side facing downward:
If you are installing this furniture on a hard surface floor, like
laminate or tile, use the box that the desk top came in as
your barrier to the floor. This will prevent the surface, and
your floor, from getting scratched.
2
Line up the legs with the metal holes in the desk top.
Use the provided screws to attach the legs:
the screws lining up the legs into the threaded inserts.
Alternate between each screw to tighten them down,
while making sure that all screws are tight by the end.
This will ensure the tighest fit possible and that the legs
are aligned.
If you have storage, perform the next step. If
not, move on to step 5.
Congratulations!
You just built a desk. Now add your favorite accessories and snap a picture of your new workspace. Show us your newly created space and how you
made your space work! @TheHONCompany #TheHONCompany #MakeYourSpaceWork
(x20) Screws (with storage)
Position
3
Bend the flat metal according to the diagram below:
piece of metal that was included in the box is your storage. Lay
the metal down on a protected surface with the small flaps facing
down. Fold the 3 sides of the storage upward, like in the image
below. The small flaps will face outward when folded correctly.
Pencil Drawer
4 4
Line up the storage with the metal holes in the desk top. Use
the provided screws to attach the storage.
used on either the right side OR the left side. Feel free to install it
where you feel it's most comfortable. Position the screws lining up
the legs into the threaded inserts. Alternate between each screw
to tighten them down, while making sure that all screws are tight
by the end. This will ensure the tightest fit possible and that the
storage is aligned.
Pencil Drawer U-Storage
5
Grab a friend and flip the desk over and put into place.
You're now ready to start working on the important stuff!
The flat
U-Storage
The U-storage can be
U-Storage