Advertisement
Ceres Multipurpose – Seat Upholstered Assembly
Items Required:
1 – New Seat Upholstered Assembly:
Applicable Part No's: 92-3550XX, 92F3550XX, 92-3564XX, 92F3564XX, 92L3565XX
#2 Phillips Screwdriver or Equivalent
7 - #10 HI-LO Screw (Part No: 50-9719) – May use existing seat assembly screws on chair.
1. Tilt Ceres Multipurpose chair or place Ceres chair on elevated surface for removal of
seat assembly (See Figure 1 below).
56-0121 Rev. A
Page 1
Replacement Instructions
Figure 1
The HON Company
200 Oak Street
Muscatine, IA 52761
800- 833-3964
hon.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HON Ceres
Summary of Contents for HON Ceres
- Page 1 #2 Phillips Screwdriver or Equivalent 7 - #10 HI-LO Screw (Part No: 50-9719) – May use existing seat assembly screws on chair. 1. Tilt Ceres Multipurpose chair or place Ceres chair on elevated surface for removal of seat assembly (See Figure 1 below).
- Page 2 3. Remove seat bottom cover and pull seat assembly from Ceres Multipurpose chair. 4. Take new seat assembly and center the seat assembly with the Ceres Multipurpose frame (see Figure 3). Make sure the seat assembly is positioned under the frame.
- Page 3 5. Place the seat bottom cover on top of the Ceres Multipurpose frame. Make sure all (7) fastener points on the bottom cover line up with the seat assembly (see Figure 4). Fasten all (7) screws to attach the seat bottom cover with the seat assembly.
Need help?
Do you have a question about the Ceres and is the answer not in the manual?
Questions and answers