Adjusting The Lcd Brightness; Turning The Camera Alert Sounds On Or Off - Epson PhotoPC 850Z User Manual

Adjusting the LCD Brightness

To adjust the brightness of the LCD screen, follow these
steps:
1
Turn the camera dial to
Then press the ISO button ( under Camera SETUP ).
You see the Camera SETUP menu:
2
Press the or button (next to the up and down
arrows) to adjust the screen brightness.
to display the SETUP menu.
Turning the Camera Alert Sounds On
or Off
Normally, the camera clicks to let you know when an image
has been captured and makes sounds whenever you press any
of its buttons. However, you can turn the alert sounds off, or
set the camera to click only when it captures an image. To set
the alert sounds, follow these steps:
1
Turn the camera dial to
Then press the ISO button (under Camera SETUP ).
You see the Camera SETUP menu (shown to the left).
2
Press the ISO button (under Beep ) to cycle through
these choices:
The camera clicks when an image is
Shutter
captured.
Never Turns all sounds off.
The camera makes sounds whenever
Always
you press a button and clicks when the
camera captures images.
to display the SETUP menu.
Adjusting Camera Settings 7-3
7
A
B