Table of Contents
Advertisement
RESETTING THE AUTO POWER SAVE
You can change the setting for Auto Power Save. The default is 3 minutes,
but you can also choose 1, 5 or 20 minutes.
Turn the DIAL SWITCH to SET UP MODE and then
turn the POWER ON.
The SETUP menu will appear on the LCD monitor.
1.
Use the ud buttons to choose "Power Save".
Use the l r buttons to change the setting.
Note:
When using an AC adapter
When you are using an AC adapter, the camera will enter sleep mode after 20
minutes (no matter what the settings are). The camera will automatically turn off
5 minutes after it has entered sleep mode.
DATE & TIME AND DATE / TIME FORMATS
How to set the Date and Time.
Turn the DIAL SWITCH to SET UP MODE and then
turn the POWER ON.
The SETUP menu will appear on the LCD monitor.
1.
Use the ud buttons to choose "Date Time".
Use the l r buttons to choose the year/month/date.
Note:
The limit on setting the DATE and TIME is 2033.12.31.
2.
Use the ud buttons to change the numbers then press the
button to confirm the new value.
Press the
MACRO button to deselect.
3.
Use the ud buttons to select "Date Format" then use the l r buttons
to select "Y.M.D. 24hr".
4.
Use the ud buttons to change to "M.D.Y.". Use the l r buttons to
select the "hr" format. Then use the ud buttons again to change to "12
hr".
5.
To confirm the new formats, press the
Press the
MACRO button to deselect.
ADJUSTING LCD BRIGHTNESS
You may change the brightness of the LCD monitor.
MEMORY CARD FORMATTING
You can reset the card to its default status.
ALERT
❏
❏
❏
FLASH
❏
1.
2.
FLASH button.
Turn the DIAL SWITCH to SET UP MODE and then
turn the POWER ON.
The SETUP menu will come up on the monitor.
Use the ud buttons to choose "LCD Brightness".
Use the l r buttons to change the settings.
Brighter LCD monitor
Everything on the card will be completely deleted!
Please note that when a memory card is formatted, all the data that was included
in the card at the factory like the PRINT Image Framer frames will also be
deleted.
Back up desired images by exporting them to a computer before you reformat.
Never format a camera memory card using a computer. Use this camera only.
Turn the DIAL SWITCH to SET UP MODE and then
turn the POWER ON.
The SETUP menu will appear on the LCD monitor.
Choose Format Card using the ud buttons, the press either the r or
FLASH button.
The message "All data on the memory card will be erased." will
appear.
Press the
MACRO button to go ahead with the formatting.
If you wish to cancel the "Format" action, press the
ADDITIONAL SETTINGS
Darker LCD monitor
FLASH button.
49
Advertisement
Table of Contents
