Epson PhotoPC 850Z User Manual page 56

NOTE
When you're adding audio recordings or taking pictures with
HyPict image quality, the shortest time interval available is 20
seconds.
Follow these steps to use the time lapse feature:
1
Secure the camera on a flat surface or on a tripod. (See
page A-3 for information on attaching the camera to a
tripod.)
2
Turn the camera dial to
light turns green.
You see a preview of your picture on the LCD screen,
with a red frame around it. CONTINUOUS appears on
the screen.
. Wait until the camera status
3
Press the bottom right button (under Mode Change ).
You see the following screen:
The current setting for the time lapse interval (hours,
minutes, and seconds) appears in the center of the
screen, with seconds highlighted.
4
Press the or button (next to the up and down
arrows) to change the highlighted setting, then press the
ISO button (under the left arrow) to move to the next
setting and repeat the process. Continue until you've set
the correct interval.
time lapse
interval setting
Setting Up Special Shots 3-5
3
A
B