Epson PhotoPC 850Z User Manual page 29

4
Click the Install EPSON Photo!3 and Program
Uploader button. Follow the instructions on the screen.
5
When you return to the Setup screen, click the Install
EPSON Photo File Uploader button. Follow the
instructions on the screen.
6
When installation is complete, click Exit .
7
Restart your computer.
Installing Your Windows 98 USB Driver
If you're installing on a Windows 98 system with a USB
port, complete the steps above to install your software. The
first time you connect the camera to your computer with
your USB cable, you'll see the Add New Hardware Wizard.
(See page 8-1 if you need help connecting the camera.)
NOTE
You may need your Windows 98 system disk for this installation.
1-16 Setting Up Your Camera and Software
Follow these steps to install the driver for your camera:
1
Insert your PhotoPC 850Z CD-ROM in your drive.
2
At the first screen in the Add New Hardware Wizard,
click Next .
3
Select Search for the best driver for your device ,
then click Next .
4
Select Specify a location and browse to your
CD-ROM drive.
5
Select the Win98E folder if you're installing the English
driver (or the Win98S folder to install the Spanish
driver, or the Win98F folder to install the French
driver). Click OK .
6
On the following screen, click Next . The wizard locates
your camera's driver.
7
Click Next on the installation screen to install the
driver. When installation is complete, click Finish .