7
If your selection is correct, press the bottom left button
(next to Done ). If you need to change your selection,
press the bottom right button (under Reset ) and repeat
steps 4 and 5.
8
When you're ready to print your stickers, follow the
steps on page 14-7. You may want to make a test print
to make sure your pictures are aligned properly. Then
you can use the Adjust setting to align them for your
final printout.
NOTE
For stickers, the Paper Type setting is automatically set to
Glossy Film and you can choose only Fine or Normal print
modes.
14-14 Printing Directly From the Camera
Printing an Index of Your Images
The Index print format lets you print a contact sheet with
thumbnail images of all the images on your memory card.
The following table shows how your printout will look:
Layout
options
Letter or A4
Index
Paper Size options
A6