Epson PhotoPC 850Z User Manual page 39

NOTE
If you're using batteries, the camera shuts off automatically
after a designated period of inactivity. (The default is 30
seconds. See page 7-1 for instructions on setting the power
off interval.) If the image on your LCD screen disappears,
press the shutter button to "wake" the camera.
3
Using the preview image to guide you, make changes to
the settings on the View menu, if you like.
See Chapter 3 for special shots, see Chapter 4 for
framing, focusing, and zooming shots, or see Chapter 5
for color and exposure settings.
NOTE
You can also use the camera's buttons to change the image
quality, flash, or timer. (See the following sections in this
chapter for details on these settings.)
2-8 Taking Pictures
4
Push the optical zoom control to the left (counter-
clockwise) to zoom in on your subject, or to the right
(clockwise) to zoom out.
shutter button
5
Center your subject on the screen, then press the shutter
button halfway down to lock the auto focus and
exposure.
The camera status light stops flashing and you see a
green circle on the screen when the lens locks in
focus and the camera locks its exposure settings. While
holding the shutter button down, you can reframe your
picture if you want.
zoom control