Standard Pipemarker - Brady M710 User Manual

3. Select the desired template.
4. For continuous labels, navigate to the Length field and enter the intended length of the label.
5. Tap OK.
6. Enter text or symbols in each area. For help editing see
"Symbols" on page
7. Press PREVIEW to view the label before printing.

Standard PipeMarker

The Standard PipeMarker label type enables you to accurately label contents of pipes, conduits, and
ducts according to the approved standards in the specific country. Directional arrows can be included
on one or both ends of the pipe marker, indicating flow direction. These arrows are part of the
template.
Pipe markers are compatible with continuous label supplies only. If no continuous label supply is
installed when the Standard PipeMarker label type is selected, a message displays indicating
incompatible label supply and the Standard PipeMarker selection is canceled.
For EU pipe markers, make sure that you have selected a color standard in Setup, Label Type. See
"Label Type" on page
To create a standard pipe marker label:
1. Press LABEL TYPE.
2. Select either NA Safety or EU Safety.
3. Select Standard PipeMarker. The printer displays the settings screen for standard pipe
markers. The settings displayed are different for North America and the European Union.
These differences are marked by NA and EU in the steps.
4. Fill in the first settings screen.
•
•
•
M710 User Manual
49. For help navigating areas see
11.
Pipe Contents [EU]: In the Pipe Contents list, select the property of the chemical or
substance that flows through the pipe.
The printer displays the color of ribbon and label supply needed for the selected pipe
contents. This information is based on the color standard that you specified during setup.
See "Label Type" on page
Pipe Contents [NA]: Select the field and type in the name of the chemical or substance that
flows through the pipe. For example, water, steam, flammable gas, and so on.
Pipe Marker Arrow Ends [NA and EU]: Select the desired arrows from the list.
"Go to Label or Area" on page
11.
Standard PipeMarker
"Editing Text" on page 39
Label Types
and
44.
74