Safety Templates (North America); General Templates (Europe) - Brady M710 User Manual

Safety Templates (North America)

Safety Templates are designed for use with preprinted pre-sized and continuous labels. Other pre-
sized labels with a 2:1 length to height ratio can also be used. Continuous labels will have a length that
is twice the height.
If preprinted pre-sized labels are being used, only two templates are available and the template does
not prompt you for header information. The template automatically adjusts the width of the areas
depending on the width of the media.
For any other media used, you can choose from all six available templates. If the template contains
header information, you will be prompted to select a header.
To create a safety label:
1. Press LABEL TYPE.
2. Select NA Safety and then Safety Templates. The printer displays the settings screen for
safety templates.
3. Select the desired template.
4. Tap Set Graphics. The printer displays a screen for selecting graphics.
5. If the template chosen contains header information, use the left and right navigation keys to
select the desired header.
6. If the template chosen contains a graphic, tap Category and then tap the category of graphic
that you want to choose from. This changes the selection of graphics available under Graphic
#1.
7. Tap Graphic #1 and then scroll through the list to select the desired graphic.
8. Press
9. If you want to switch to a different template, tap Set Type and go back to step 3.
10. When finished, tap OK.
11. The editor opens to enter text. If the template has more than one text area, use the area
navigation keys to access each area.
12. Press PREVIEW to view the label before printing.

General Templates (Europe)

When choosing General Templates you are presented with a grid outlining the different templates to
use for the safety label you want to produce. There are nine templates from which to choose. General
templates are designed for use with pre-sized or continuous labels.
To create a safety label with the general template:
1. Press LABEL TYPE.
2. Select EU Safety and then General Templates. The printer displays the settings screen for
general templates.
M710 User Manual
.
Label Types
Safety Templates (North America)
73