Loading The Media - Toshiba B-SP2D SERIES Owner's Manual

5. LOADING THE MEDIA

5. LOADING THE MEDIA
A cutter is attached to the inside of the media cover. Care should be taken
not to injure your hand with the cutter when opening the cover.
This printer prints both labels and receipts.
When loading the media, you do not have to turn off the power.
1. Slide the media cover release catches inside and open the media cover.
Media Cover
2. Put a label roll or a receipt roll into the media holder unit in the orientation
as shown below.
Section 5.p65
WARNING!
5- 1
1
EO1-33052
5. LOADING THE MEDIA
Media Cover
Release Catch
10/31/2005, 11:39 AM