Power Connector Cable - HP Pavilion dm4 Maintenance And Service Manual

4. Lift the USB board straight up (3) to remove it from the computer.
Reverse this procedure to install the USB board.
NOTE: When reinstalling note that the screw goes into the upper hole.

Power connector cable

Description
Power connector cable (includes cable and connector)
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (select models only) (see
c. Keyboard (see
66 Chapter 4 Removal and replacement procedures
Battery on page 38).
Hard drive on page 45)
Keyboard on page 49)
Optical drive on page 47)
Spare part number
608273-001