Nokia Beacon G6 Product Manual page 88

Configure a Beacon G6
Network configuration
Configuring WAN
Table 7-11 WAN parameters
Field
Connection mode
IP mode
NAT
TR-069
VOIP
Internet
IPTV
Enable VLAN
VLAN mode
VLAN ID
VLAN PRI
LAN port binding
88
(continued)
Description
Select the connection mode of the WAN connection from the list:
• Route Mode
• Bridge Mode
This field is applicable only if the connection mode is Route Mode.
Select an IP mode from the list:
• IPv4
• IPv4 & IPv6
• IPv6
When the IP mode IPv4 & IPv6 or IPv6 is selected, you need to configure Address method,
Enabled prefix delegation and Prefix type.
Select the toggle button to enable NAT.
This option is applicable only if the connection mode is Route Mode.
Select the toggle button to enable TR-069.
This option is applicable only if the connection mode is Route Mode.
Select the toggle button to enable VoIP.
This option is applicable only if the connection type is IPoE and the connection mode is Route
Mode.
Select the toggle button to enable Internet.
This option is applicable only if the connection mode is Route Mode.
Select the toggle button to enable IPTV.
Select the toggle button to enable VLAN.
This option is applicable only if the connection mode is Route Mode.
Select a VLAN mode from the list:
• VLAN binding
• Tunnel
• Transparent
This option is applicable only if the connection mode is Bridge Mode.
Enter the VLAN ID.
Allowed values: 2 to 4094
In the bridge mode, this option is applicable only if the VLAN mode is Tunnel or VLAN binding.
Enter the VLAN PRI. VLAN priority allows to assign a priority to outbound packets containing the
specified VLAN ID.
Allowed values: 0 to 7
In the bridge mode, this option is applicable only if the VLAN mode is VLAN binding.
Select the toggle button next to the LAN to enable it.
Select the toggle button next to the PVID to enable it. This option is not applicable if the VLAN
mode is Tunnel or Transparent.
Use subject to agreed restrictions on disclosure and use.
3FE-49949-AAAA-TCZZA
Beacon G6
June 2022
Issue 1