Wan; Table 7-38 Trusted Network Parameters - Nokia Beacon G6 Product Manual

Configure a Beacon G6
Security configuration
Configuring access control
Table 7-37 Access control parameters
Field

WAN

LAN
3
Click Save to save the ACL configuration.
4
If the Enable trusted network option is enabled, add one or more subnet trusted networks.
You can add up to 32 trusted networks.
Table 7-38 Trusted Network parameters
Field
Source IP start
Source IP end
5
Click Add +.
E
ND OF STEPS
June 2022
Issue 1
(continued)
Description
The following protocols are supported: ICMP, Telnet, SSH, HTTP, TR-069, HTTPS,
SFTP.
Select an access control level for each protocol:
Allow, Deny, or Trusted Network Only
LAN side: Allow or Deny
The following protocols are supported: ICMP, Telnet, SSH, HTTP, TR-069, HTTPS,
SFTP.
Select an access control level for each protocol:
LAN side: Allow or Deny
Description
Enter a start IP address range for the new subnet trusted network.
Enter an end IP address range for the new subnet trusted network.
Use subject to agreed restrictions on disclosure and use.
3FE-49949-AAAA-TCZZA
Beacon G6
155