Download Print this page

DeWalt XR DCD1623 Original Instructions Manual page 40

Magnetic drill press
Hide thumbs Also See for XR DCD1623:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 34
EnGLIsH
Transport Mode: When the cap is attached to the FLEXVOLT
battery, the battery is in Transport mode. Keep the cap
for shipping.
When in Transport mode, strings
of cells are electrically
disconnected within the pack
resulting in 3 batteries with a
lower Watt hour (Wh) rating as compared to 1 battery with a
higher Watt hour rating. This increased quantity of 3 batteries
with the lower Watt hour rating can exempt the pack from
certain shipping regulations that are imposed upon the higher
Watt hour batteries.
For example, the Transport
Wh rating might indicate
3 x 36 Wh, meaning
3 batteries of 36 Wh each.
The Use Wh rating might
indicate 108 Wh (1 battery implied).
Storage Recommendations
1. The best storage place is one that is cool and dry away
from direct sunlight and excess heat or cold. For optimum
battery performance and life, store battery packs at room
temperature when not in use.
2. For long storage, it is recommended to store a fully charged
battery pack in a cool, dry place out of the charger for
optimal results.
nOTE: Battery packs should not be stored completely
depleted of charge. The battery pack will need to be recharged
before use.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the
labels on the charger and the battery pack may show the
L
following pictographs:
Read instruction manual before use.
p
See Technical Data for charging time.
q
Do not probe with conductive objects.
r
Do not charge damaged battery packs.
s
Do not expose to water.
t
Have defective cords replaced immediately
u
Charge only between 4 ˚C and 40 ˚C.
v
Only for indoor use.
38
Example of Use and Transport Label Marking
x
TM
Discard the battery pack with due care for
the environment.
y
Charge battery packs only with designated D
chargers. Charging battery packs other than the
designated D
charger may make them burst or lead to other
dangerous situations.
z
Do not incinerate the battery pack.
B
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
A
TRANSPORT (with built‑in transport cap). Example: Wh
rating indicates 3 x 36 Wh (3 batteries of 36 Wh).
Battery Type
The following tools operate on a 18 volt battery pack: DCD1623
These battery packs may be used: DCB184G, DCB547G. Refer to
Technical Data for more information.
Package Contents
The package contains:
1 Magnetic drill press
1 16 mm Keyed chuck attachment
1 Chuck key
1 Coolant bottle with tube
1 Chip guard
1 Safety chain
2 Ejection pins
1 Feed handle set
1 Coolant bottle bracket
1 Allen key
1 Wrench
2 Wing bolts
1 Kitbox
1 Instruction manual
nOTE: Battery packs and chargers are not included with N
models. Battery packs and chargers are not included with NT
models. B models include Bluetooth® battery packs.
nOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by D
WALT is under license. Other trademarks and
e
trade names are those of their respective owners.
Check for damage to the tool, parts or accessories which may
have occurred during transport.
Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
a
Read instruction manual before use.
g
Wear ear protection.
WALT batteries with a D
WALT
e
e
WALT
e

Advertisement

loading

This manual is also suitable for:

Xr dcd1623x2gXr dcd1623n