DeWalt XR DCD1623 Original Instructions Manual page 34

EnGLIsH
MAGNETIC DRILL PRESS
DCD1623
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Max.power output w/ 9Ah battery
No load speed forward
Low gear
High gear
No load speed reverse
Low gear
High gear
Max. drill diameter with twist drill bit
Max. drill diameter with annular cutter
Max. Taping
Max. cutting depth in steel
Tool holder (flat shank)
Weight
Noise values and/or vibration values (triax vector sum) according to EN62841‑1:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
32
EC‑Declaration of Conformity
o
Machinery Directive
WALT one of the
e
Magnetic Drill Press
DCD1623
DCD1623
V 18
DC
D
1
Technical Data are in compliance with:
W 1100
2006/42/EC, EN62841‑1:2015.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
min‑1 130–420
the following address or refer to the back of the manual.
min‑1 250–810
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
min‑1 350
min‑1 680
mm 16
mm 50
Markus Rompel
M14
Vice‑President Engineering, PTE‑Europe
mm 50
D
65510, Idstein, Germany
mm 19
29.04.2022
kg 14.4
dB(A) 85
dB(A) 94
dB(A) 3
D
"technical data" are in compliance with:
EN62841‑1:2015.
These products conform to the following UK Regulations
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended).
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact D
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
WALT declares that these products described under
e
WALT, Richard‑Klinger‑Straße 11,
e
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
Magnetic Drill Press
DCD1623
WALT declares that these products described under
e
WALT at
e
WALT.
e
WALT at the following
e
WALT.
e