General Information; Ec Declaration Of Conformity - Atlas Copco LBB16 EP024-U Instructions Manual

LBB16 EP024-U
Familiarize yourself with the enclosed leaflet "General Safety Instructions for
Drilling and Tapping.
Warning
Disassembly and assembly precautions
The rotor blades (vanes) in the tool contains PTFE. The normal health and
safety recommendations concerning PTFE must be observed when handling
these rotor blades. Particles from wear of blades might be found in the machine
housing or on the blades. Make sure that these particles do not get in contact
with open fire. Wash your hands before smoking since PTFE-particles heated
by glow can produce fumes which may cause an allergic reaction.

General information

EC DECLARATION OF CONFORMITY

We, Atlas Copco Industrial Technique AB, S-105 23 STOCKHOLM, SWE-
DEN declare that the product (with name, type and serial number, see front
page) is in conformity with the following Directive(s):
2006/42/EC
Harmonised standards applied:
ISO 11148-3
Technical file available from:
Quality Manager, Atlas Copco Industrial Technique, Stockholm, Sweden
Stockholm, 1 July 2013
Tobias Hahn, Managing Director
Signature of issuer
Installation
Installation of vibrating tools
It is recommended that a minimum length of 300 mm of flexible hose for com-
pressed air is inserted between a vibrating tool and the quick-action coupling.
Air quality
• For optimum performance and maximum machine life we recommend the
use of compressed air with a maximum dew point of +10°C. We also rec-
ommend the installation of an Atlas Copco refrigeration-type air dryer.
• Use a separate air filter of type Atlas Copco FIL. This filter removes solid
particles larger than 15 microns and also removes more than 90 % of liquid
water. The filter must be installed as close as possible to the machine/equip-
ment and prior to any other air preparation unit such as REG or DIM (please
see Air Line Accessories in our main catalogue). Blow out the hose before
connecting.
EN
© Atlas Copco Industrial Technique AB - 9836 973020 20
Safety and operating instructions
5