Linking Audio And Video Sources - Epson Ensemble HD 1080 User Manual

Linking Audio and Video Sources

Once you've connected the audio and video cables, you need to tell the Ensemble HD system which audio and
video ports to use together. That way, when you select a device with the remote control (VCR, cable, satellite,
etc.), the matching audio and video sources will be automatically used. You link the audio and video sources
together using the Source Assign screen.
Note
The label you assign to a device (e.g. "CABLE") is what you see on the projection screen when you're selecting sources. It
doesn't affect the device names shown on the remote control's LCD screen.
1
Make sure the MAIN menu is displayed on the remote control. If necessary,
press the button.
MAIN
2
Point the remote control at the screen and press the
You see the Ensemble HD menu screen:
3 Use the d button to highlight
button.
4 Use the d button to highlight
(Select) button.
You see the screen shown below. The video port to which you've connected your video equipment is listed
in the left-hand column:
Audio Audio
Voice
Bass
Video
Treble
Surround
Language
Preference
Front Distance
Center Distance
Reset
Rear Distance
Test Tone
Move
, then press the
Video
, then press the
Source Assign
[ S o u r c e A s s i g n ]
Video Input
HDMI1 Cable
HDMI2
Component
S-Video
Composite
Return Move
ESC
button.
MENU
0 dB
0 dB
0 dB
0 dB
5 ft.
5 ft.
5 ft.
Enter
Sel Menu
(Select)
SEL
d button
SEL
Label Audio Input
HDMI1
Sat HDMI2
HD Coax
DVR Optical
Video Analog
Adjust Exit
Menu
34
Exit