Advertisement
Quick Links
Download this manual
See also:
User Manual
Home Cinema LS100
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online User's Guide.
Connect the projector
Choose from the following connections. See the sections below or the online
User's Guide for details.
Video device
Connect multiple video devices and use the Source Search button on the
projector or remote control to switch between them.
Mobile media device
Connect tablets, smartphones, and other devices that support the MHL™
standard to the HDMI1/MHL port.
Some devices may require an adapter or may not require an MHL cable. Not all
features or functions may be supported. Check your device's documentation for
more information.
Computer
Connect one end of an HDMI cable to one of the projector's HDMI ports and
the other end to an HDMI port on your computer.
Note: For more information on connecting the projector to your computer or
other devices (camera, USB flash drive, etc.), see the online User's Guide.
RCA video cable
(composite video)
Component video
to VGA cable
HDMI cable
MHL cable
Streaming device
HDMI cable
Connect audio
Built-in speaker
The projector has a built-in speaker that can play audio from a video source
(DVD player, streaming device, etc.) connected by an HDMI cable. If you do not
use an HDMI connection, you must connect your device's audio output to the
projector's audio input.
External speakers
Connect your device's audio output to your home theater receiver or powered
speakers.
Note: The internal speaker is disabled when an external device is connected.
If you are using an HDMI connection to the projector, you may need to reduce
the projector speaker volume to zero (0), or make sure that the correct audio
output is selected on your device.
Home theater system
Video source
Surround sound
Powered speakers
External speakers
Video source
Note: See your home theater receiver documentation for more information
on connections.
Turn on your equipment
1
Turn on your video source or computer.
2
Plug in the projector. The
RCA audio cable
HDMI cable
Video cable
Receiver
Projector
Video cable
Projector
power light on the projector turns blue.
Advertisement
Related Manuals for Epson LS100
Summary of Contents for Epson LS100
-
Page 1: Quick Setup
Home Cinema LS100 Quick Setup Connect audio Built-in speaker Before using the projector, make sure you read the safety instructions in the online User’s Guide. The projector has a built-in speaker that can play audio from a video source (DVD player, streaming device, etc.) connected by an HDMI cable. If you do not Connect the projector use an HDMI connection, you must connect your device’s audio output to the... -
Page 2: Using The Remote Control
If your image is uneven on the sides, you can use the keystone correction Press the power button on the projector or remote control. The feature to adjust the image. To use this feature, press the projector beeps, and the Status light flashes blue and then stays on. button to display the keystone correction screen. -
Page 3: Troubleshooting
Epson within five working days of receipt of the replacement. Telephone support Epson requires a debit or a credit card number to secure the cost of the replacement product in the event that you fail to return the defective one. If Epson authorizes To use the Epson ®... - Page 4 You agree to act in good faith to resolve the dispute, but if you and Epson do not reach a resolution within the sixty (60) days, you may commence an arbitration.