Adjusting The Sound - Epson Ensemble HD 1080 User Manual

Adjusting the Sound

To access the Audio menu, make sure the MAIN menu is displayed on the remote control, press the
button, then select
Audio
You can adjust the following settings:
•
Voice
Lets you adjust the volume of the center channel, which is mainly used for actors' voices in movies.
•
Bass
Lets you adjust the volume at the lower end of the sound spectrum. This setting adjusts the bass sound
from the left and right front channels and the subwoofer.
•
Treble
Lets you adjust the volume at the higher end of the sound spectrum.
•
Surround
Lets you adjust the volume from the rear (surround) speakers.
•
Front Distance
Adjusts the sound delay from the left and right front speakers. Measure and enter the distance from your
main seating location to the left and right speakers on the screen.
•
Center Distance
Adjusts the sound delay from the front center speakers. Measure and enter the distance from your main
viewing location to the speakers in the middle of the screen.
•
Rear Distance
Adjusts the sound delay from the rear (surround) speakers. Measure and enter the distance from your main
seating location to the rear speakers.
•
Test Tone
Lets you check and adjust the sound level for each speaker. See the next section for details.
Note
You can also adjust the Voice, Bass, Treble, and Surround settings by selecting the
TONE
and then selecting . Press
. You see this screen:
Audio Audio
Voice
Bass
Video
Treble
Surround
Language
Preference
Front Distance
Center Distance
Reset
Rear Distance
Test Tone
Move
TONE
repeatedly to select each setting.
0 dB
0 dB
0 dB
0 dB
5 ft.
5 ft.
5 ft.
Enter
Sel Menu
AUDIO
46
Menu
Exit
menu on the remote control,