Restoring Remote Control Factory Defaults - Epson Ensemble HD 1080 User Manual

Restoring Remote Control Factory Defaults

If you customize the remote control and find that it no longer works correctly, you can restore it to its original
settings.
Caution
This procedure erases all commands and macros you taught the remote control, and any other customized changes you
may have made.
1
To restore the remote control, press and hold the
this time, you see WARNING flash at the bottom of the screen.
2
When you see the RESET screen shown below, release the buttons.
3 Select to erase all customized settings, or select
SURE?
After you restore the remote control, it re-initializes and you see the MAIN menu after several seconds.
and stop buttons for about 10 seconds. During
MAIN
RESET
SURE
EXIT
to cancel.
EXIT
83