Erasing Learned Buttons And Macros - Epson Ensemble HD 1080 User Manual

The top of the screen changes to EDIT:
3
Select the option.
PAGE
Note
The TEXT option is for editing device names and commands. See "Editing Device Names and Commands" on
page 75.
The top of screen displays PAGE, as shown at right, and you see a list of
devices (DVD, CABLE, SAT, etc.).
4
Navigate to the page you want to add or hide.
If a page is already visible, it says
currently hidden, it says
5
Press the button on the side of the remote control to add or hide the page.
LIGHT
Repeat steps 4 and 5 to add or hide additional pages.
6
When you've finished, press the

Erasing Learned Buttons and Macros

You can erase any commands that were learned from another remote control or any macros you created.
Note
This operation does not erase the text used for commands or macros, just the functions that they perform. If you want to
delete the text itself, see "Editing Device Names and Commands" on page 75.
1
Press and hold both the
displays SETUP.
Note
You have 30 seconds to complete each step. After that, the remote control returns to normal operation.
2
Select the option.
ERASE
You see this screen:
EDIT
TEXT
PAGE
EXIT
at the top of the screen. If a page is
HIDE?
.
ADD?
button several times to return to normal operation.
MAIN
and buttons for approximately three seconds. The top of the screen
MAIN ENT
ERASE
Select PAGE
LEARN
MACRO
EXIT
79
PAGE
DVD
CABLE
SAT
HD
RADIO
1 OF 2