Home; Login/Logout; User Login / Admin Login - Siemens HiPath 2000 Manual

Home

You will find the entry Home in the navigation area of every Web page.
Click on Home to switch to the Status > Handset Web page. Logging out
takes place automatically.

Login/Logout

User Login / Admin Login

If your handset is protected by a Handset PIN and/or an Admin PIN, you
must log in when establishing a connection to the Web Interface.
The first time you click on one of the menus User or Admin a login dialogue
box is downloaded for you to enter a PIN.
A distinction is made as follows:
Login is requested after you have clicked on User in the menu bar.
•
If you enter the Handset PIN, after establishing a connection you can
access all functions in the User menus. If an Admin PIN is assigned,
you cannot use the Admin menu.
If you enter the Admin PIN, you can access all Web Interface functions,
data and settings.
• The login page is opened after you have clicked on the Admin menu.
In this case you need to enter the Admin PIN. After this you can access
all Web Interface functions, data and settings.
If you have not assigned an Admin PIN, every subscriber to the
WLAN can access all the Web server functions (without logging in).
Logging in
In the Your PIN field, enter the Handset PIN or the Admin PIN and click on
the Apply button. If the PIN is correct the first Web page for the menu
concerned is loaded. If the PIN is incorrect you will receive an appropriate
message.
• If you enter the Handset PIN for the Web Interface wrongly three
times in a row, you can no longer log in with the handset PIN.
You then have the following options: click on the Admin menu,
log in with the admin PIN, and either reset the handset PIN or
reboot the handset.
• If you enter the Handset PIN wrongly on the handset three ti-
mes in a row, the handset will be blocked. In this case you have
to reset the Handset PIN via the Admin menu to cancel the
block. Rebooting does not cancel the block.
Login/Logout
5