Anchor Settings; Autopilot; Pairing With An Autopilot; Controlling The Autopilot - Garmin QUATIX 7 SAPPHIRE Owner's Manual

Anchor Settings

From the watch face, press START, select Anchor, hold MENU, and select the activity settings.
Drift Radius: Sets the allowable drift distance while anchored.
Update Interval: Sets the time interval for updating anchor data.
Anchor Alarm: Allows you to enable or disable an alarm for when the boat moves beyond the drift radius.
Anchor Alarm Duration: Allows you to set the anchor alarm duration. When the anchor alarm is enabled, an alert
appears each time the boat moves beyond the drift radius during the specified alarm duration.

Autopilot

You are responsible for the safe and prudent operation of your vessel. The autopilot is a tool that enhances your
capability to operate your boat. It does not relieve you of the responsibility of safely operating your boat. Avoid
navigational hazards and never leave the helm unattended.
Always be prepared to promptly regain manual control of your boat.
Learn to operate the autopilot on calm and hazard-free open water.
Use caution when operating the autopilot near hazards in the water, such as docks, pilings, and other boats.

Pairing With an Autopilot

1 From the watch face, select START > Autopilot > START.
2 Bring your quatix device within 3 m (10 ft.) of the marine device.
3 Set your compatible Garmin autopilot helm control to search for a remote control.
See your autopilot helm control owner's manual for more information.
After you pair the devices, they connect automatically when turned on, within range, and the app is open on
the watch. If you need to pair with another autopilot helm control, in the autopilot app, hold MENU and select
Settings > Pair New.

Controlling the Autopilot

1 From the watch face, select START > Autopilot.
2 Select an option:
• To engage the autopilot heading hold, hold a steady course, select START, and release the helm.
• To change the heading, with the autopilot engaged, select UP for starboard and DOWN for port.
• To change the steering mode, hold MENU, select Steering Mode, and select an option.
• To perform a steering pattern, hold MENU, select Pattern Steering, and select a pattern.
NOTE: You can change the steering patterns available on your quatix device from your autopilot.
• To take the helm and place the autopilot in standby mode, select STOP.
Marine Activities
WARNING
11