NOTE:
This procedure applies only to computers shipped with a plastic chassis.
2. Install the
M.2 2230 solid-state drive
NOTE:
This procedure applies only to computers shipped with a plastic chassis.
3. Install the
base
cover.
4. Follow the procedure in
Display hinge caps
Removing the display hinge caps
CAUTION:
The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
M.2 2230 solid-state drive
4. Remove the
wireless
card.
5. Remove the
display
assembly.
About this task
NOTE:
This procedure applies only to computers with a plastic chassis.
The following images indicate the location of the display hinge caps and provide a visual representation of the removal
procedure.
90
Removing and installing Field Replaceable Units (FRUs)
or the
M.2 2280 solid-state
After working inside your
Before working inside your
or the
M.2 2280 solid-state
drive, whichever applicable.
computer.
computer.
drive, whichever applicable.