Table of Contents
Advertisement
Steps
1. Place the power button with optional fingerprint reader in the slot on the palm-rest and keyboard assembly.
2. Align the screw hole on the power button with optional fingerprint reader to the screw hole on the palm-rest and keyboard
assembly.
3. Replace the screw (M2x2) to secure the power button with optional fingerprint reader to the palm-rest and keyboard
assembly.
4. Adhere the tape to secure the optional fingerprint-reader flexible printed circuit to the palm-rest and keyboard assembly.
Next steps
1. Install the
I/O
daughter-board.
2. Install the fan.
3. Install the
M.2 2230 solid-state drive
4. Install the
base
cover.
5. Follow the procedure in
Power-adapter port
Removing the power-adapter port
CAUTION:
The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following images indicate the location of the power-adapter port and provide a visual representation of the removal
procedure.
80
Removing and installing Field Replaceable Units (FRUs)
or the
M.2 2280 solid-state
After working inside your
Before working inside your
drive, whichever applicable.
computer.
computer.
Advertisement
Table of Contents
