Table of Contents
Advertisement
Steps
1. Place the 4-cell battery, along with the battery cable, in the slot on the palm-rest and keyboard assembly.
2. Align the screw holes on the 4-cell battery to the screw holes on the palm-rest and keyboard assembly.
3. Replace the five screws (M2x3) to secure the 4-cell battery to the palm-rest and keyboard assembly.
4. Connect the battery cable to the connector on the system board.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Disconnecting the battery cable
CAUTION:
The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
3-cell battery
About this task
The following image indicates the location of the battery cable and provides a visual representation of the removal procedure.
After working inside your
Before working inside your
or the
4-cell
battery, whichever applicable.
computer.
computer.
Removing and installing Field Replaceable Units (FRUs)
59
Advertisement
Table of Contents
