Display Hinge Caps; Removing The Display Hinge Caps - Dell Inspiron 15 3521 Service Manual

Hide thumbs Also See for Inspiron 15 3521:

Setup and specifications (24 pages)

Quick start manual (2 pages)

Manual (168 pages)

Table Of Contents

100

101

Table of Contents

NOTE:

The power-adapter port is secured in place by the left display hinge. There is no screw, tape, or adhesives

securing the power-adapter port to the palm-rest. As a result, technicians should take note of whether the power-

adapter port has fallen out of the system during subsequent removal procedures.

2. Slide the display assembly at an angle and place the display assembly on the palm-rest and keyboard assembly.

3. Gently press down on the display hinges to align the screw holes on the display hinges with the screw holes on the palm-rest

and keyboard assembly.

4. Replace the four screws (M2.5x5) to secure the display hinges to the palm-rest and keyboard assembly.

5. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly.

6. Route the WLAN antenna cables into the routing hooks, on the palm-rest and keyboard assembly, and under the speaker

cable.

7. Connect the display cable and speaker cable to the respective connectors on the system board.

Next steps

1. Install the

wireless

card.

2. Install the

base

cover.

3. Install the

secure digital

4. Follow the procedure in