Table of Contents
Advertisement
Steps
1. Connect the battery cable to the connector on the battery and close the latch.
2. Route the battery cable through the routing guides on the battery.
Next steps
1. Install the
3-cell battery
2. Install the
base
cover.
3. Follow the procedure in
Speakers
Removing the speakers
CAUTION:
The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
3-cell battery
About this task
The following image indicates the location of the speakers and provides a visual representation of the removal procedure.
62
Removing and installing Field Replaceable Units (FRUs)
or the
4-cell
battery, whichever applicable.
After working inside your
Before working inside your
or the
4-cell
battery, whichever applicable.
computer.
computer.
Advertisement
Table of Contents
