Loading Paper - Epson PictureMate Show PM 300 User Manual

Removing Your Memory Card
When you are ready to remove a memory card, first
make sure the memory card light is not flashing.
Caution: Do not remove a card while the memory card light is
flashing; you may lose photos on your card.
Pull the card out of the slot.

Loading Paper

Caution: Don't load plain paper; this may damage PictureMate.
1
Open the paper support.
10
2
Slide out the edge guides.
3
Create a stack of up to 20 sheets of paper and
separate the sheets slightly by fanning them.
4
Place your paper into the slot between the edge
guides with the glossy or whiter side up. Slide the
edge guides inward slightly.
Load glossy or
whiter side up