Epson PictureMate Show PM 300 User Manual page 27

4
Connect your camera's USB cable to your camera
and the port on the side of PictureMate.
5
Use your camera's controls to select and print
photos on PictureMate. (See your camera manual
for instructions.)
Settings for Camera Printing
When you print directly from your camera, you can't
select settings the way you can when you print from a
memory card. Instead, you can use the PictBridge
Settings on the Setup Menu.
1
Press the Menu button on the remote control.
2
Select Setup and press OK.
3
Select PictBridge Settings and press OK.
4
Select one of the following settings, then press
OK.
●
Layout (see page 19)
● Color Effect (see page 23)
●
Enhance (see page 22)
●
Scene Detection (see page 23)
●
Date (see page 14)
● Camera Text (see page 24)
●
Quality (see page 23)
●
Fix Red-Eye (see page 21)
5
When you are finished, disconnect your camera
before inserting a memory card in PictureMate.
27