Epson PictureMate Show PM 300 User Manual page 15

4
Select 1 Per Page or Proof Sheet (20 per page)
and press OK.
If you selected 1 Per Page, you can press l or r to
review your photos.
5
If you selected 1 Per Page and you want to print
with a white border or include the date, select
Borderless/Date Stamp: Off and press OK. Then
select the option you want and press OK again.
Note: If you want to change the layout or edit your
photos, press Menu . See page 18 for instructions.
6
Make sure you have enough paper loaded, then
press Print to start printing.
Note: If you are printing more than 20 pages, you will
need to reload paper while printing. Load a maximum of
20 sheets at a time. When you see a message that paper
is out, load more paper and press OK to continue
printing. If you need to cancel printing, press
Clear .
After printing, you see a message asking if you
want to save the printed photos to the print
history.
7
Follow the instructions on the screen to save the
photos. See page 14 for more information.
Printing From a Slideshow
You can select from 12 slideshows with 3D animation,
and choose photos for printing right from the show.
1
From the Home menu, select SLIDE SHOW and
press OK on the remote control.
Stop/
2
Select the slideshow you want, then press OK.
PictureMate displays your photos as a slideshow
with a variety of animation effects.
When you see the "countdown" in the upper right
corner of the screen, you can select a photo for
printing.
15