Epson PictureMate Show PM 300 User Manual page 37

After a moment, you see this screen:
5
Connect the USB cable to any open USB port on
your computer. Then connect the other end to the
USB port on the back of PictureMate.
Your PictureMate software is installed.
Note: If you see a screen like this one, remove your
memory card and click the X in the corner to close it.
Note: PictureMate is automatically set as your default
printer. If you have another printer, you can change this
setting in the Windows Control Panel.
6
Follow the on-screen instructions to install the rest
of the software.
7
When you see a message that installation is
complete, click Exit.
37