Load Paper - Epson PictureMate Start Here Manual

3
Plug In and Turn
On PictureMate
1
Connect the power cable
to the power adapter.
2
Plug the small cable into
the back of PictureMate.
3
Plug the other end of
the power cable into a
standard power outlet.
4
Press the
PictureMate gets the ink ready for printing.
You see this message:
After a few minutes, when PictureMate is ready,
you see this message:
5
Press the OK button.
4

Load Paper

Your PictureMate comes with photo paper made especially
for it.
Caution:
Don't load or print on plain paper; this may damage
PictureMate.
1
Flip open the
paper support.
2
Pull up the paper
support all the way.
3
Open the output tray.
Note:
Make sure the paper support is fully extended.
Make sure the handle
is all the way down
On button to turn on PictureMate.