Install Software; Load Paper In The Cassette - Epson WorkForce Pro WP-4010 Series Quick Setup Instructions

4
Load paper in the cassette
You can load letter-, A4-, or legal-size plain paper in the
cassette. For instructions on loading envelopes and special
paper in the rear MP tray, see the online User's Guide.
1
P ull out the paper cassette.
2
S lide the edge guides outward, and position them for the
size of paper you are using.
N ote: If you are loading legal-size paper, extend the cassette as
shown.
3
I nsert the paper with the glossy or printable side
facedown.
N ote: Make sure the paper is loaded against the front edge
guide and not sticking out from the end of the cassette.
4
S lide the edge guides against the paper, but not too
tight. Make sure the paper is under the tabs on the edge
guides.
5
G ently insert the paper cassette.
N ote: The paper may slide forward slightly as you insert the
cassette. This is normal.
6
E xtend the output tray and raise the paper stopper as
shown. (Do not raise the paper stopper for legal-size
paper.)
5
Install software
Note: If your computer does not have a CD/DVD drive, you can
download the software from the Epson website (see "Epson technical
support").
Caution: Be sure to close your other programs, including any screen
savers and virus protection software, before beginning this software
installation.
1
M ake sure the printer is NOT CONNECTED to a
computer.
W indows : If you see a Found New Hardware screen, click
®
Cancel and disconnect the USB cable. You can't install your
software that way.
2
Insert your product CD.