Configuring Media; Creating Paper Configurations - Epson Stylus Pro GS6000 Quick Reference Manual

|

Configuring Media

8
Configuring Media
Pre-Printing Checklist
Whenever you print on a new media type, follow these guidelines to configure the media and print:
•
Check the media packaging for print requirements.
•
Select a paper configuration number (1 to 30) for the media. See the next section.
•
Select these settings for the paper configuration using the information supplied with your media:
PRINT MODE
PRE HEATER
PLATEN HEATER
POST HEATER
•
Print a nozzle check pattern and clean the print heads, if necessary. See page 10.
•
Perform a 500 mm Line Feed Adjustment and print a sample pattern. See page 9.
•
Print a bidirectional alignment pattern and align the print heads. See page 10.
•
Select the paper configuration number and print.
Make a note of the media type you set up for this media number on the back of this Quick Reference Guide.

Creating Paper Configurations

Press , press d to highlight
Menu
1.
Press d to highlight
2.
Select the paper configuration number (1 to 30) you want to use for this media type and press
3.
Select the print settings for your media. See page 21 for details on the settings.
4.
When done, press the Pause button.
5.
PAPER SETUP
again, then press
PAPER SETUP
PAPER SUCTION
DRYING TIME
CARRIAGE MOVEMENT
PRINT MULTIPLE LAYER
, and press .
Menu
again.
Menu
.
Menu