Epson Stylus Pro GS6000 Quick Reference Manual page 17

| Replacing the Ink Flushing Pad
16
Replacing the Ink Flushing Pad
Once a year, you need the replace the printer's flushing pad. You may
need to replace it sooner if you notice ink smears on your media or if the
pad becomes damaged or excessively soiled. Use the replacement flushing
pad and plastic gloves that came in the Maintenance Kit.
Note: If you need more flushing pads, purchase an Additional Printer
Maintenance Kit (1 year supply). See page 23 for ordering information.
Press , press d to highlight
Menu
1.
Press d to highlight
2.
press .
OPEN MAINT COVERS
Open the right maintenance cover.
3.
Put on a plastic glove and remove the flushing pad by grasping its tab.
4.
Caution: Hold the flushing pad upright and level as you remove it to prevent ink from spilling. Be careful not
to let ink spill onto any part of the printer.
Install the new flushing pad with the tab facing forward, and press it down until it clicks into place.
5.
Close the right maintenance cover.
6.
Press the Pause button.
7.
Dispose of the used flushing pad and gloves in compliance with industrial waste disposal laws and local
8.
government ordinances as required in your area.
MAINTENANCE
CARRIAGE MAINTENANCE
appears on the LCD display.
Plastic gloves
, then press again.
Menu
, press , then
Menu
Flushing pad