Control Panel Lights - Epson Stylus Pro GS6000 Quick Reference Manual

|

Control Panel Lights

18
Control Panel Lights
Light Description
Power On: printer is turned on
P
Flashing: printer is processing or printing a print job, performing a cleaning operation,
warming up, or shutting down
Off: printer is turned off
Pause On: printer is paused or in menu mode
Check b paper On: no media is loaded, media is out, or the paper lever is in the Released position
Flashing: media is jammed, almost out, loaded crooked, or there is another error condition
Check H ink On: an ink cartridge is expended, not installed, or not compatible with the printer
Flashing: an ink cartridge is nearly expended
High Heat See the next two tables for descriptions
Low Heat
Error alert lamp Flashing: an error has occurred
Status of and
High Heat
High Heat Low Heat
light light
On On
Flashing Off
Flashing Flashing
Off Off
Status of and
High Heat
selected heater type is indicated on the control panel):
High Heat Low Heat
light light
On On
On Off
Off On
lights when the printer is in a
Low Heat
Description
All three heaters have reached their preset temperature
At least one of the heaters is warming up to its preset temperature
A heater error has occurred
All three heaters are turned off
lights when selecting a preset temperature for a heater (currently
Low Heat
Description
You can select a higher or lower temperature than the current setting
You can select only a higher temperature than the current setting
You can select only a lower temperature than the current setting
or
READY WARMING UP
state: