Harmar Mobility HELIX CSL500 Installation & Service Manual page 8

HELIX CURVED STAIR LIFT: SECTION 3
INSTALLATION
4. Place the rail in the correct position, beginning
with the first section downstairs. Unwrap the
rail, checking the stamp located on each rail for
order of placement on stairs.
See Figures 3-4 and 3-5.
Follow the drawing included with the rail
system.
Run the charging station wire through the lower
rail. There is a hole at the charger location for it
to come out. See Figure 3-6.
HELIX: Install Manual
8
24SEP2021 | 630-00063-01 REV D
Figure 3-4
Figure 3-5
Figure 3-6
5. Check both ends of the rail and wipe clean. You
may need to clean the ends with Emery paper
and add a small amount of grease to help slide
the pipes together. See Figure 3-7.
Figure 3-7
6. Slide the pipes together one at a time, starting
at the bottom in the order indicated on the
label. Install on the stair supports.
See Figures 3-8 through 3-10.
Figure 3-8
Figure 3-9