Printer Status; Checking Ink Levels; Replacing Ink Cartridges - Epson Stylus Pro 10000 Archival Ink Quick Reference Manual

Checking Ink Levels and Replacing Ink Cartridges
Checking Ink Levels and Replacing Ink Cartridges
Before you begin a large print job, you should check your
ink levels. If one of your cartridges is low, you can replace it
before you start. Or, you can wait until the ink runs out,
replace the cartridge, and then continue the job without
any loss of print quality.

Checking Ink Levels

1
Press the
SelecType
appears on the display.
MENU
2
Press the button.
Item
appears, indicating the firmware version installed in
your printer.
3
Continue pressing the
amount remaining for each of the 6 inks:
E*****F = full
E ****F = 3/4 full
E ***F = 1/2 full
E **F = 1/4 full
E *F = nearly empty
E F = empty
4
Press to exit the Printer Status menu.
SelecType

Replacing Ink Cartridges

INK OUT
When one of the
is displayed on the control panel, the corresponding
cartridge is nearly empty. Make sure you have the correct
replacement cartridge.
Photographic Dye ink:
Black
Yellow
Magenta
Cyan
Light Magenta
Light Cyan
Archival ink:
Black
Yellow
Magenta
Cyan
Light Magenta
Light Cyan
button until

PRINTER STATUS

VERSION <number>
button to display the
Item
INK LOW
lights is flashing and
T499201
T500201
T501201
T502201
T503201
T504201
T511201
T512201
T513201
T514201
T515201
T516201
When one of the
INK OUT
is displayed, the cartridge is empty. To replace the
cartridge, first make sure the printer is on.
1
Push the indentation on the ink compartment cover
to release the lock and open the cover.
2
Locate the slot containing the empty ink cartridge
corresponding to the
the top of the clamp and pull it forward.
6
lights stays on and
INK OUT
light. Press down on
Ink Out
Continue