Precautions - Mooer LOOPER X2 Owner's Manual

PRECAUTIONS

*Pleasereadcarefullybeforeproceeding*
Power
Supply
Please connect the designated AC adapterto an AC outlet ofthe correct voltage.Please be sure to use only an AC adapter which supplies
9V DC , 3A , center negative. Unplug the AC power adapter when not in use or during electricastorms.Please onty use the
original powersupply included with your device.
Connections
Always turn off the power ofthis and all other equipment before connecting or disconnecting, this will help preventmalfunction and
/or damage to other devices, Also make sure to disconnect all connection cables and the power cordbefore moving this unit.
Cleaning
Clean only with a soft, dry cloth. lfnecessary, slightly moisten the cloth, Do not use abrasive cleanser, cleaning alcoho.paint thinners,
wax, solvents, cleaning fluids, or chemical-impregnated wiping cloths, interference with other electricadevices Radios and televisions
placed nearby may experience reception interference. Operate this unit at a suitabledistance from radios and televisions.
Location
To
avoid
deformation,
discoloration,
or
other
serious
damage,
do
not
expose
this
unit
to
the
following
conditions.
●Direct
sunlight


●
Magnetic
fields


●Excessive
dusty
or
dirty
location


●Heat
sources
●Extreme
temperature
or
humidity



●
High
humidity
or
moisture




●
Strong
vibrations
or
shocks
FCC
certification
This
device
complies
with
Part
15
of
the
FCC
Rules.
Operation
is
subiect
to
the
following
two
conditions:
●This
device
mav
not
cause
harmfulinterference.
●This
device
must
accept
any
interference
received,
including
interference
that
may
cause
undesired
operation.
01