Effects Send And Return; Input - Alto MX-30 User Manual

3.3.5 EFFECTS Send and Return

You can send the PFL signal through the SEND
etc.. Then from the same effect unit you bring the signal back into the MX-30 via the RETURN
and the audio signal is routed into the MAIN output.

3.3.6 INPUT

- PHONO input
31
(RCA) jacks shall be used to connect the turntable.
- LINE input : Through these RCA type sockets you can connect a CD player, an MD player or any other
32
high level device such as Tape Recorder, DAT, etc..
Important Notice: If you wish to connect LINE level devices into the LINE/PHONO input, make sure that the
LINE/PHONO switch
input will be overloaded and will produce distortion.
: The three Channels feature PHONO inputs including RIIA preamplifier for turntable. PIN
is on LINE position otherwise the sensitive RIAA preamplifier built-in in the Phono
33
sockets to a signal processor such as reverb, equaliser,
29
10
sockets
30