Husqvarna LT 5005 Workshop Manual page 46

3. Remove the top clamp (A).
C
4. Carefully tap the bellows (B) with a soft hammer and
remove the outer tube (C).
5. Remove the lower clamp (D).
6. Remove the bellows.
7.8.5 To install the bellows for the rammer leg
1. Clean the surfaces on the bellows, the bellows
support and the outer tube.
2. Install the bellows (A).
46 - Repair and servicing
3. Install the outer tube (B).
A
B
D
4. Align the outer tube and rammer leg. Tighten the top
5. Install the spring unit. Refer to
6. Install the engine. Refer to
A
B
clamp (C) and lower clamp (D).
the spring unit LT 5005, LT 6005, LT 6005 H on
page 41 and To remove and install spring unit
LT 8005 on page 43 .
engine LT 5005, LT 6005, LT 6005 H on page 25
To remove and install the engine LT 8005 on
and
page 29 .
C
D
To remove and install
To remove and install the
1726 - 001 -