Husqvarna LT 5005 Workshop Manual page 25

engine oil on your skin, clean with soap and
water.
1. Put a container below the drain plug for the engine
oil.
2. Remove the oil drain plug.
3. Connect a hose to the oil drain hole.
4. Tilt the product and let the oil run through the hose
and into the container.
5. Install the oil drain plug and tighten it.
6. Fill with new engine oil. Refer to
LT 8005 on page 50 for the correct type of oil.
7. Do a check of the engine oil level.
1726 - 001 -
Technical data
7.4.5 To remove and install the engine LT 5005,
LT 6005, LT 6005 H
1. Remove the 8 bolts and the bottom cover.
2. Remove the 12 bolts and the 2 side covers.
Repair and servicing - 25