Table of Contents
Advertisement
ABB i-bus® KNX MAINTENANCE AND CLEANING
10
Maintenance and cleaning
10.1
Maintenance
The device is maintenance-free if used properly. In the event of damage, e.g. during transport and/or
storage, repairs are not allowed to be made.
10.2
Cleaning
1. Disconnect the device from the electrical power supply before cleaning.
2. Clean dirty devices using a dry cloth or a slightly damp cloth.
Note about navigation in the PDF: Key combination 'Alt + left arrow'
jumps to the previous view/page
Product manual | EN-US | VC/S 4.x.1 | 2CDC508220D0211 Rev. B 171
Advertisement
Table of Contents
