Base Setpoint Is - ABB i-bus VC/S 4 1 Series Product Manual

ABB i-bus® KNX PARAMETERS
7.4.21

Base setpoint is

This parameter is used to define which value corresponds to the base setpoint.
More information: → ⁠
If only the
sponds to the respective
Option
Comfort heating setpoint
Comfort cooling setpoint
Mean value between Comfort
heating and cooling
Prerequisites for visibility
• Parameter window
– Parameter
– Parameter
• Parameter window
tion and adjustment
• The parameter is in the parameter window
or
• Parameter window
– Parameter
– Parameter
• Parameter window
tion and adjustment
• The parameter is in the parameter window
Note about navigation in the PDF: Key combination 'Alt + left arrow'
jumps to the previous view/page
B asic setpoint, Page ⁠ ⁠ 1
Note
Heating operating mode or
Comfort
The base setpoint corresponds to the setpoint for Comfort heating. If the base setpoint is changed
via the group object
distances between the two Comfort values remain unchanged.
The base setpoint corresponds to the setpoint for Comfort cooling. If the base setpoint is changed
via the group object
distances between the two Comfort values remain unchanged.
A mean value is calculated from the setpoints for Comfort heating and Comfort cooling. This mean
value is adopted as the base setpoint.
Channel X
Channel function
Basic-stage heating [controller]
Channel X
\ Option
Channel X
Channel function
Basic-stage cooling [controller]
Channel X
\ Option
74.
Cooling operating mode is configured, the base setpoint corre-
setpoint.
Basic setpoint , the setpoint for Comfort cooling shifts as well. The relative
Basic setpoint , the setpoint for Comfort heating shifts as well. The relative
Application parameters
\ Parameter window
Option Controller channel
\
\ all options except Deactivated
Setpoint manager
\ Parameter window
Relative
Channel X \ parameter window
\ Parameter window Application parameters
Option Controller channel
\
\ all options except Deactivated
\ Parameter window Setpoint manager
Relative
Channel X
\ parameter window
Product manual | EN-US | VC/S 4.x.1 | 2CDC508220D0211 Rev. B 68
Setpoint specifica-
\ Parameter
Setpoint manager .
\ Parameter Setpoint specifica-
Setpoint manager
.